Features
- Psat: 10 W
- PAE: 40 %
- LSG: 12 dB
- S21: 19 dB
- S11: -11 dB
- S22: -8 dB
- CW operation
- Small 5 x 5 mm footprint
CMPA0560008
MMIC Power Amplifier, 10 W, 0.5 - 6 GHz
Wolfspeed’s CMPA0560008S is a 10W packaged MMIC HPA utilizing Wolfspeed’s high performance, 0.15um GaN on SiC production process. The CMPA0560008S operates from 0.5 - 6 GHz and supports a variety of RF applications such as electronic warfare, test and measurement, radar among others. The CMPA0560008S achieves 10 W of saturated output power with 12 dB of large signal gain and typically 40% power-added efficiency under CW operation.
Packaged in a 5x5 mm plastic overmold QFN, the CMPA0560008S provides superior performance and environmental robustness in a small form factor allowing customers to improve SWaP-C benchmarks in their next-generation systems.
Products
CMPA0560008
No filters selected, showing all 2 products
CMPA0560008
Product SKU | Buy Online | Request Sample | Data Sheet | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Efficiency | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CMPA0560008S-AMP1 | Yes | GaN on SiC | 0.5 GHz | 6 GHz | 10 W | 19 dB | 40% | 28 V | Packaged MMIC | Surface Mount | |||
CMPA0560008S | Yes | GaN on SiC | 0.5 GHz | 6 GHz | 10 W | 19 dB | 40% | 28 V | Packaged MMIC | Surface Mount |
Application
- Electronic Warfare
- Test and Measurement
- Radar
- General Amplification
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
Documents
Document Type | Document Name |
|---|---|
| Application Notes | |
| Application Notes | |
| Design Files | |
| Data Sheets | |
| S-parameters | |
| S-parameters | |
| S-parameters | |
| S-parameters | |
| S-parameters | |
| S-parameters | |
| S-parameters | |
| Technical Papers & Articles | by Donald A. Gajewski – Scott Sheppard – Tina McNulty – Jeff B. Barner – Jim Milligan and John Palmour
This paper reports the reliability performance of the Wolfspeed – GaN/AlGaN HEMT MMIC process technology – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
|
| Technical Papers & Articles | by Raymond S. Pengelly – Simon M. Wood – James W. Milligan – Scott T. Sheppard – and William L. Pribble
|
| Technical Papers & Articles | |
| Product Catalog | |
| Sales Terms |
Knowledge Center
Continue Reading Technical Articles
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
Continue Reading Technical Articles
Improving Pulse Fidelity in RF Power Amplifiers
A radar system designer’s most coveted objectives are achieving a long range, adequate resolution to distinguish objects in close proximity to each other, and the ability to not only determine target velocities but target types in order to help differentiate friendlies from adversaries.A combination of both approaches is essential, and engineers can design for peak power points of the load-pull simulation while also paying attention to other parts of the circuit for baseband signal fidelity.
Continue Reading Technical Articles