Features
- Superior Overall Performance
- Pulsed and CW Operation
- Environmental Protection
CMPA851A050
8.5 - 10.5 GHz GaN MMIC HPA
Wolfspeed’s CMPA851A050 MMIC HPA family supports up to 80 W utilizing Wolfspeed’s high performance, 0.15um GaN on SiC production process. The product family operates from 8.5-10.5 GHz and supports both defense and commercial-related radar applications. The CMPA851A050 family supports up to 80 W of saturated output power with 29 dB of large signal gain and is offered in various package platforms. Pulsed and CW are both available operating conditions depending on the package selection.
The CMPA851A050 family offers bare die, SMT and flange package solutions allowing the user to optimize their SWAP-C analsysis in meeting next generation requirements.
Products
CMPA851A050
No filters selected, showing all 5 products
CMPA851A050
Product SKU | Buy Online | Request Sample | Data Sheet | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
CMPA851A050S-AMP1 New | Yes | GaN on SiC | 8.5 GHz | 10.5 GHz | 80 W | 29 dB | 28 V | Packaged MMIC | Surface Mount | |||
CMPA851A050S New | Yes | GaN on SiC | 8.5 GHz | 10.5 GHz | 80 W | 29 dB | 28 V | Packaged MMIC | Surface Mount | |||
CMPA851A050D New | Yes | GaN on SiC | 8.5 GHz | 10.5 GHz | 80 W | 29 dB | 28 V | MMIC Bare Die | Die | |||
CMPA851A050F-AMP New | Yes | GaN on SiC | 8.5 GHz | 10.5 GHz | 50 W | 29 dB | 28 V | Packaged MMIC | Flange | |||
CMPA851A050F New | Yes | GaN on SiC | 8.5 GHz | 10.5 GHz | 50 W | 29 dB | 28 V | Packaged MMIC | Flange |
Benefits
- High SWAP-C Analysis
- Superior Thermal Management
- Automated Assembly
Applications
- Defense and Commercial Radar Systems
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
- Compliance
Documents
Document Type | Document Name |
|---|---|
| Application Notes | |
| Application Notes | |
| Product Catalog | |
| Sales Terms |
Knowledge Center
Continue Reading Technical Articles
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
Continue Reading Technical Articles
Improving Pulse Fidelity in RF Power Amplifiers
A radar system designer’s most coveted objectives are achieving a long range, adequate resolution to distinguish objects in close proximity to each other, and the ability to not only determine target velocities but target types in order to help differentiate friendlies from adversaries.A combination of both approaches is essential, and engineers can design for peak power points of the load-pull simulation while also paying attention to other parts of the circuit for baseband signal fidelity.
Continue Reading Technical Articles