Contact
中文
Home
CGHV27015S

CGHV27015S

cghv27015s_med
15 W; DC - 6.0 GHz; 50 V; GaN HEMT

Wolfspeed’s CGHV27015S is an unmatched; gallium-nitride (GaN) high electron mobility transistor (HEMT) designed specifically for high efficiency; high gain and wide bandwidth capabilities; which makes the CGHV27015S ideal for LTE; 4G Telecom and BWA amplifier applications. The CGHV27015S GaN HEMT devices are suitable for 3300-3500MHz; 4900-5900MHz; 700-960MHz; 1800-2200MHz; 2500-2700MHz and extended S and C Band applications. The CGHV27015S operates from a 50 volt rail. The transistor is available in a 3mm x 4mm; surface mount; dual-flat-no-lead (DFN) package.

Product SKU
Buy Online
Request Sample
Data Sheet
Recommended For New Design?
Technology
Frequency Min
Frequency Max
Peak Output Power
Gain
Efficiency
Operating Voltage
Form
Package Type
CGHV27015S
Yes
GaN on SiC
DC
6 GHz
15 W
21 dB
32%
50 V
Packaged Discrete Transistor
Surface Mount
Product SKU
Buy Online
Request Sample
Data Sheet
Recommended For New Design?
Technology
Frequency Min
Frequency Max
Peak Output Power
Gain
Efficiency
Operating Voltage
Form
Package Type
CGHV27015S
Yes
GaN on SiC
DC
6 GHz
15 W
21 dB
32%
50 V
Packaged Discrete Transistor
Surface Mount
Features
  • 2.4 – 2.7 GHz Operation
  • 15 W Typical Output Power
  • 21 dB Gain at 2.5 W PAVE
  • -38 dBc ACLR at 2.5 W PAVE
  • 32% efficiency at 2.5 W PAVE
  • High degree of APD and DPD correction can be applied
Applications
  • LTE; 4G; Telecom and BWA Amplifiers
  • Tactical Communications
  • CATV; UAV data link
Apply Filters
Document Type
Document Name
Version
Application Notes
Version: 1.0
Application Notes
Version: a
Application Notes
Version: 1.0
Data Sheets
Version: 3.4
Technical Papers & Articles
by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
Version: Design
Technical Papers & Articles
by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
Version: Design
Product Ecology
CGH27030S – CGH40006S – CGHV1F006S – CGHV1F025S – CGHV27015S – CGHV27030S
Version: 1.0
Product Catalog
Version: 1.0
Sales Terms
Version: M
Document Type
Document Name
Version
Application Notes
Version: 1.0
Application Notes
Version: a
Application Notes
Version: 1.0
Data Sheets
Version: 3.4
Technical Papers & Articles
by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
Version: Design
Technical Papers & Articles
by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
Version: Design
Product Ecology
CGH27030S – CGH40006S – CGHV1F006S – CGHV1F025S – CGHV27015S – CGHV27030S
Version: 1.0
Product Catalog
Version: 1.0
Sales Terms
Version: M
Need information?
Ready to buy?
Find a Distributor
Want to keep in touch?

Knowledge Center

View All
rf_virtual_tradeshow
Communication Infrastructure

Wolfspeed RF on the Web: A Virtual Trade Show Experience

We’ve missed seeing you at our industry trade shows this year. Check out our virtual booth to get an in-depth look at some of Wolfspeed’s most popular rf products
Continue Reading 
 Technical Articles
image_top-design-considerations-for-x-band-gan-power-amplifiers
GaN on SiC

Top Design Considerations for X-Band GaN Power Amplifiers

In this webinar, Dr. Robert Smith of PRFI Ltd. will discuss PA design considerations such as MMIC process selection, transistor sizing and biasing. He will also talk about the power combining of multiple transistors, matching considerations, and load-pull simulations.
Register Now 
 Webinars
image_gan-solutions-small-packages
GaN on SiC

GaN Solutions: Small Packages for Big Radar Challenges

AESA systems use active arrays, each with hundreds or even thousands of antennas. In many cases, the system is evaluated on the basis of size, weight, power, and cost (SWaP-C). The technology enabling the latest AESA radar systems must therefore offer significant benefits in terms of SWaP-C improvements.
Continue Reading 
 Technical Articles
Cree Wolfspeed Logo
FacebookTwitterLinkedInYouTube
  • Contact
  • Where to Buy
  • Document Library
  • Knowledge Center
  • News
  • Events
  • Privacy Policy
  • Terms of Use
Copyright © 2021 Cree Wolfspeed