Features
- 24 dB Small Signal Gain
- 25 W Typical PSAT
- Operation up to 28 V
- High Breakdown Voltage
- High Temperature Operation
CMPA2560025
25-W; 2.5 – 6.0-GHz; GaN MMIC Power Amplifier
NOTE: Not recommended for new designs. CMPA2060035 is the recommended replacement.
Wolfspeed’s CMPA2560025 is a gallium-nitride (GaN) HEMT-based monolithic microwave integrated circuit (MMIC). GaN has superior properties compared to silicon or gallium arsenide; including higher breakdown voltage; higher saturated electron drift velocity and higher thermal conductivity. GaN HEMTs also offer greater power density and wider bandwidths compared to Si and GaAs transistors. This MMIC contains a two-stage reactively matched amplifier; enabling very wide bandwidths to be achieved in a small-footprint. Available in die and a screw-down package featuring a copper-tungsten heat sink.
Products
CMPA2560025
No filters selected, showing all 3 products
CMPA2560025
Product SKU | Buy Online | Request Sample | Data Sheet | CAD Model | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Efficiency | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CMPA2560025D | No | GaN on SiC | 2.5 GHz | 6 GHz | 25 W | 24 dB | 31% | 28 V | MMIC Bare Die | Die | ||||
CMPA2560025F-AMP | No | GaN on SiC | 2.5 GHz | 6 GHz | 25 W | 24 dB | 31% | 28 V | Evaluation Board | Flange | ||||
CMPA2560025F | No | GaN on SiC | 2.5 GHz | 6 GHz | 25 W | 24 dB | 31% | 28 V | Packaged MMIC | Flange |
Applications
- Ultra Broadband Amplifiers
- Fiber Drivers
- Test Instrumentation
- EMC Amplifier Drivers
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
- Compliance
Documents
Document Type | Document Name |
|---|---|
| Application Notes | |
| Application Notes | |
| Application Notes | |
| Application Notes | |
| Application Notes | |
| Design Files | |
| Data Sheets | |
| Data Sheets | |
| Technical Papers & Articles | by Raymond S. Pengelly – Simon M. Wood – James W. Milligan – Scott T. Sheppard – and William L. Pribble
|
| Technical Papers & Articles | by Jeremy K. Fisher – Donald A. Gajewski – Thomas J. Smith
|
| Technical Papers & Articles | by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
|
| Technical Papers & Articles | by Donald A. Gajewski – Scott Sheppard – Tina McNulty – Jeff B. Barner – Jim Milligan and John Palmour
This paper reports the reliability performance of the Wolfspeed – GaN/AlGaN HEMT MMIC process technology – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
|
| Product Catalog | |
| Sales Terms |
Knowledge Center
Continue Reading Technical Articles
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
Continue Reading Technical Articles
Improving Pulse Fidelity in RF Power Amplifiers
A radar system designer’s most coveted objectives are achieving a long range, adequate resolution to distinguish objects in close proximity to each other, and the ability to not only determine target velocities but target types in order to help differentiate friendlies from adversaries.A combination of both approaches is essential, and engineers can design for peak power points of the load-pull simulation while also paying attention to other parts of the circuit for baseband signal fidelity.
Continue Reading Technical Articles