Features (Typical, 25C)
- Psat: 45W
- PAE: 45%
- LSG: 24dB
- S21: 25dB
- S11: -10dB
- S22: -8dB
- CW operation
CMPA1842040
1.8 - 4.2 GHz, 45 W GaN MMIC HPA
Wolfspeed’s CMPA1842040 is a 45W MMIC HPA utilizing Wolfspeed’s high performance, 0.15um GaN on SiC production process. The CMPA1842040 operates from 1.8-4.2 GHz and supports electronic warfare applications. The CMPA1842040 achieves 45 W of saturated output power with 25 dB of large signal gain and typically 45% power-added efficiency under CW operation.
The CMPA1842040 provides improved RF performance over a more targeted narrow bandwidth allowing customers to improve SWaP-C benchmarks in their next-generation systems.
Products
CMPA1842040
No filters selected, showing all 2 products
CMPA1842040
Product SKU | Buy Online | Data Sheet | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Efficiency | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
CMPA1842040F | Yes | GaN on SiC | 1.8 GHz | 4.2 GHz | 45 W | 24 dB | 45% | 28 V | MMIC Bare Die | Flange | ||
CMPA1842040D | Yes | GaN on SiC | 1.8 GHz | 4.2 GHz | 45 W | 25 dB | 45% | 28 V | MMIC Bare Die | Die |
Applications
- Electronic Warfare
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
- Compliance
Documents
Document Type | Document Name |
|---|---|
| Application Notes | |
| Application Notes | |
| Data Sheets | |
| Data Sheets | |
| Product Catalog | |
| Sales Terms |
Knowledge Center
Continue Reading Technical Articles
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
Continue Reading Technical Articles
Improving Pulse Fidelity in RF Power Amplifiers
A radar system designer’s most coveted objectives are achieving a long range, adequate resolution to distinguish objects in close proximity to each other, and the ability to not only determine target velocities but target types in order to help differentiate friendlies from adversaries.A combination of both approaches is essential, and engineers can design for peak power points of the load-pull simulation while also paying attention to other parts of the circuit for baseband signal fidelity.
Continue Reading Technical Articles