Contact
中文
Home
CGHV1J006D GP4

CGHV1J006D-GP4

Wolfspeed CGHV1J006D 6-W 18.0-GHz GaN HEMT Die
Warning:

Cancer & Reproductive Harm – www.p65warnings.ca.gov

6-W; 18.0-GHz; GaN HEMT Die
Request Model Access

Wolfspeed’s CGHV1J006D is a high-voltage gallium-nitride (GaN) high-electron-mobility transistor (HEMT) on a silicon-carbide substrate; using a 0.25-μm gate-length fabrication process. This GaN-on-SiC product offers superior high-frequency; high-efficiency features. It is ideal for a variety of applications operating from 10 MHz to 18 GHz at 40 V with a high breakdown voltage.

Product SKU
Buy Online
Request Sample
Data Sheet
Recommended For New Design?
Technology
Frequency Max
Peak Output Power
Gain
Efficiency
Operating Voltage
Form
Package Type
CGHV1J006D-GP4
Yes
GaN on SiC
18 GHz
6 W
17 dB
60%
40 V
Discrete Bare Die
Die
Product SKU
Buy Online
Request Sample
Data Sheet
Recommended For New Design?
Technology
Frequency Max
Peak Output Power
Gain
Efficiency
Operating Voltage
Form
Package Type
CGHV1J006D-GP4
Yes
GaN on SiC
18 GHz
6 W
17 dB
60%
40 V
Discrete Bare Die
Die
Features
  • 17 dB Typ. Small Signal Gain at 10 GHz
  • 60% Typ. PAE at 10 GHz
  • 6 W Typical Psat
  • 40 V Operation
  • Up to 18GHz Operation
Applications
  • Satellite Communications
  • PTP Communications Links
  • Marine Radar
  • Pleasure Craft Radar
  • Port Vessel Traffic Services
  • Broadband Amplifiers
  • High Efficiency Amplifiers
Apply Filters
Document Type
Document Name
Application Notes
Application Notes
Application Notes
Application Notes
Data Sheets
S-parameters
S-parameters
Technical Papers & Articles
by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
Technical Papers & Articles
by Raymond S. Pengelly – Simon M. Wood – James W. Milligan – Scott T. Sheppard – and William L. Pribble
Technical Papers & Articles
by Raymond S. Pengelly – Brad Millon – Donald Farrell – Bill Pribble – and Simon Wood
Presentation from the 2008 IEEE MTT-S International Microwave Symposium (IMS) Workshop on Challenges in Model-Based HPA DesignThis presentation discusses attributes of GaN HEMTs – Wolfspeed GaN HEMT models – design examples (Broadband CW Amplifiers and Linear WiMAX Amplifier) – and future model improvements.
Technical Papers & Articles
by Donald A. Gajewski – Wolfspeed
Randall D. Lewis – Northrop Grumman Corp.
Benjamin M. Decker – Northrop Grumman Corp.
Technical Papers & Articles
by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
Product Catalog
Sales Terms
Document Type
Document Name
Application Notes
Application Notes
Application Notes
Application Notes
Data Sheets
S-parameters
S-parameters
Technical Papers & Articles
by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
Technical Papers & Articles
by Raymond S. Pengelly – Simon M. Wood – James W. Milligan – Scott T. Sheppard – and William L. Pribble
Technical Papers & Articles
by Raymond S. Pengelly – Brad Millon – Donald Farrell – Bill Pribble – and Simon Wood
Presentation from the 2008 IEEE MTT-S International Microwave Symposium (IMS) Workshop on Challenges in Model-Based HPA DesignThis presentation discusses attributes of GaN HEMTs – Wolfspeed GaN HEMT models – design examples (Broadband CW Amplifiers and Linear WiMAX Amplifier) – and future model improvements.
Technical Papers & Articles
by Donald A. Gajewski – Wolfspeed
Randall D. Lewis – Northrop Grumman Corp.
Benjamin M. Decker – Northrop Grumman Corp.
Technical Papers & Articles
by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
Product Catalog
Sales Terms
Need information?
Ready to buy?
Find a Distributor
Want to keep in touch?

Knowledge Center

View All
highpower_wideband_lband_image
GaN on SiC

Thermal Considerations for X-Band MMICs Under CW Operation

Join Kasyap Patel of Wolfspeed for a live webinar on September 20th as we discuss GaN on SiC MMIC solutions to thermal concerns for next generation radar systems during continuous wave (CW) operation.
Register Now 
 Webinars
Jamming man-portable pack2
GaN on SiC

Countering RCIEDs with GaN’s Bandwidth & Power Density Advantages

Counter-RCIED devices used by the military and law enforcement rely on jamming wireless trigger signals. This article will discuss how GaN’s high-temperature reliability and power density capability enables jammer equipment to meet system SWaP-C requirements.
Continue Reading 
 Blog
RF PA 101_amplifier classes image
GaN on SiC

RF Power Amplification 101: Amplifier Classes

The purpose of the RF PA is to increase the power of the RF input signal. This is achieved by applying the signal to the gate. This article compares some of the common amplifier classes, starting with the most-linear but least-efficient Class A to the still-linear (due to the ideal transistor) but more-efficient Class F and inverse-F.
Continue Reading 
 Technical Articles
Cree Wolfspeed Logo
FacebookTwitterLinkedInYouTube
  • Contact
  • Where to Buy
  • Document Library
  • Knowledge Center
  • News
  • Events
  • Privacy Policy
  • Terms of Use
Copyright © 2021 Cree Wolfspeed