Features
- Up to 15 GHz Operation
- 25 W Typical Output Power
- 11 dB Gain at 9.4 GHz
- Application circuit for 8.9 – 9.6 GHz
CGHV1F025
25-W; DC – 15-GHz; 40-V; GaN HEMT
Wolfspeed’s CGHV1F025S is an unmatched; gallium-nitride (GaN); high-electron-mobility transistor (HEMT) designed specifically for high-efficiency; high-gain and wide-bandwidth capabilities. The device can be deployed for L; S; C; X and Ku-band amplifier applications. The data sheet specifications are based on an X-Band (8.9 – 9.6-GHz) amplifier. The CGHV1F025S operates on a 40-volt rail circuit while housed in a 3-mm x 4-mm; surface-mount; dual-flat-no-lead (DFN) package. Under reduced power; the transistor can operate below 40-V to as low as 20-V VDD; maintaining high gain and efficiency.
Products
CGHV1F025
No filters selected, showing all 2 products
CGHV1F025
Product SKU | Buy Online | Request Sample | Data Sheet | CAD Model | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Efficiency | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CGHV1F025S-AMP1 | Yes | GaN on SiC | 8.9 GHz | 9.6 GHz | 25 W | 11 dB | 51% | 40 V | Evaluation Board | Surface Mount | ||||
CGHV1F025S | Yes | GaN on SiC | DC | 15 GHz | 25 W | 11 dB | 51% | 40 V | Packaged Discrete Transistor | Surface Mount |
Applications
- L; S; C; X and Ku-Band amplifiers
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
- Compliance
Documents
Apply Filters
Document Type | Document Name |
|---|---|
| Design Files | |
| Application Notes | |
| Application Notes | |
| Application Notes | |
| Data Sheets | |
| S-parameters | |
| Technical Papers & Articles | by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
|
| Technical Papers & Articles | by Donald A. Gajewski – Wolfspeed
Randall D. Lewis – Northrop Grumman Corp. Benjamin M. Decker – Northrop Grumman Corp. |
| Technical Papers & Articles | by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
|
| Product Catalog | |
| Sales Terms |
Knowledge Center
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
SiC vs GaN vs Si: Find The Right Fit For Your Application
Explore Wolfspeed Silicon Carbide Power and GaN on Silicon Carbide RF solutions to enable your high performance systems.