Contact
中文
Home
KIT CRD 8FF65P

Evaluation Board for 650V SiC C3M™ MOSFET in a 7-pin D2PAK (TO-263-7L)

Wolfspeed KIT-CRD-8FF65P
KIT-CRD-8FF65P

This evaluation board demonstrates the switching and thermal performance of 650V SiC C3M™ MOSFET in a 7-pin D2PAK (TO-263-7L) configured in a half bridge topology. The board is designed for characterizing EON and EOFF losses and steady state thermal performance in SiC MOSFETs. The PCB contains AlN inserts under the MOSFETs to provide electrical isolation and optimized heat transfer to the heat sink.

This design :

  • Demonstrates use of an AlN inlay PCB for thermal management of surface mount power devices
  • Serves as a PCB layout example for driving D2PAK SiC MOSFETs

Specifications

  • Max DC Bus Voltage of 450V
  • Max Power of 4.2kW @ 100kHz
  • Optimized locations for scope probe measurements of drain current; VGS; and Vds
  • Predrilled thermocouple locations in the heat sink under the MOSFET
  • Synchronous and asynchronous buck and boost topologies supported
  • Kit includes two SMA and BNC adapters for measuring VGS waveforms
  • Includes heatsink; fan; fan guard; and thermal pads
  • Can be configured as full bridge DC/DC by using two evaluation boards
Applications
  • Industrial Power Supplies
  • Server/Telecom
  • EV-Charging Systems
  • Energy Storage Systems (ESS)
  • Uninterruptible Power Supplies (UPS)
What's Included
  • Fully Assembled Evaluation Board
  • Schematics
  • PCB Design File
  • Bill of Materials
  • Application Note
Request Separately
  • Low Inductance Current Monitor
  • Mechanical Specifications
kit_crd_8ff65p_block_diagram_bg
ADuM4121 Gate Driver

High Voltage, Isolated Gate Driver with Internal Miller Clamp, 2 A Output with Thermal Shutdown. The integrated miller clamp activates on the falling edge of an edge transition to further clamp the output low to counteract miller turn on effects.

View on Analog Devices
ADuM4121 Gate Driver

High Voltage, Isolated Gate Driver with Internal Miller Clamp, 2 A Output with Thermal Shutdown. The integrated miller clamp activates on the falling edge of an edge transition to further clamp the output low to counteract miller turn on effects.

View on Analog Devices
c3m0060065j_block
C3M0060065J

650V Silicon Carbide C3M™ MOSFET in 7-pin D2PAK provides low parasitic inductances for faster switching in power conversion applications

View Product
c3m0060065j_block
C3M0060065J

650V Silicon Carbide C3M™ MOSFET in 7-pin D2PAK provides low parasitic inductances for faster switching in power conversion applications

View Product
Need information?
Ready to buy?
Find a Distributor
Want to keep in touch?

Knowledge Center

View All
wolfspeed-in-automotive-power-systems
SiC MOSFETs

Wolfspeed in Automotive Power Systems

This webinar highlights the advantages of Wolfspeed’s SiC portfolio for the automotive market. The impact SiC can have on a variety of applications including EV drivetrain inverter, 400 and 800V battery system, etc. It also compares systems benefits and reference designs (XM3 300kW, Vepco 180k). Second section of the webinar introduces SiC in EV OBC, 400 and 800V battery system, unidirectional and bidirectional, comparing system benefits and reference designs (6.6kW 650V, 22kW,1200V). The webinar and its content is in Italian language.
Register Now 
 Webinars
wolfspeed-wolfpack-sic-power-modules-for-dc-fast-charging
Power Modules

Wolfspeed WolfPACK™ SiC Power Modules for DC fast charging

This webinar gives an introduction to the brand new Wolfspeed Wolfpack TM SiC Power Modules discussing its key features. It also details out three alternative architectures for the design of a 60 kW direct current charging stage with galvanic isolation and the advantages of each one them. It will highlight three-stage 60 kW architecture (ACDC-DCDC-DCDC) with our new Wolfspeed Wolfpack modules. The webinar and its content is in Italian language.
Register Now 
 Webinars
telo-header-img
SiC MOSFETs

Wolfspeed powers Telcodium’s lightest 5kW Portable Power Station

SiC is a preferred choice when it comes to high power applications. When Telcodium started desiging their portable power stations, they trusted Wolfspeed for their power electronics requirement. This electric power system,'The Beast' is compact, lightweight and can be used indoor. Read more about Telcodium's journey and how Wolfspeed partnered with them in this process.
Continue Reading 
 Technical Articles
Cree Wolfspeed Logo
FacebookTwitterLinkedInYouTube
  • Contact
  • Where to Buy
  • Document Library
  • Knowledge Center
  • News
  • Events
  • Privacy Policy
  • Terms of Use
Copyright © 2021 Cree Wolfspeed