Skip to Main Content
Contact
  • English
  • 简体中文
  • 繁體中文
View Cart

Buck Boost Evaluation Board for 650 V Silicon Carbide C3M™ MOSFET in a TO-247-X Package

Product shot of Wolfspeed's KIT-CRD-3DD065P Evaluation Board.
KIT-CRD-3DD065P
NOTE: Discontinued. SpeedVal Kit™ Modular Evaluation Platform is the recommended replacement.
This evaluation board demonstrates the switching and thermal performance of 650 V 60 mΩ Silicon Carbide (SiC) C3M™ MOSFET in a TO-247-4 package configured in a half bridge topology. The board is designed for characterizing EON and EOFF losses and steady state thermal performance in Silicon Carbide MOSFETs. The board can be configured to run as a buck or boost converter in either synchronous or asynchronous modes. The PCB also supports replacing the SiC MOSFETs with TO-247-3 package components to allow for evaluation of either package. A full LTSpice model including parasitic elements that nearly matches the performance of the hardware is available for download. This design allows measurement of:
  • Timing (TDelay-On; TDelay-Off; TRise; TFall)
  • Overshoot (VDS-Max; ID-Max)
  • Speed (di/dt; dv/dt)
  • Switching Loss (EON; EOFF; ERR)
  • Efficiency during operation up to 2.5kW

Specifications

  • Max DC Input / Output Voltage of 450V
  • Max Power of 2.5kW @ 100kHz (limited by on-board inductor; higher levels possible with alternate inductor)
  • Compatible with TO-247-4 and TO-247-3 SiC MOSFETs;
  • Compatible with TO-247 and TO-220 SiC Schottky diodes
  • Dedicated gate drivers and isolated power supplies for each C3M SiC MOSFET
  • Optimized locations for scope probe measurements of drain current; VGS; and VDS and IS
  • Synchronous and asynchronous buck and boost topologies supported
  • Kit includes two SMA to BNC adapters for measuring VGS waveforms
  • Includes heatsink; thermal clips and isolated thermal pads
Applications
  • Industrial Power Supplies
  • Server/Telecom
  • EV-Charging Systems
  • Energy Storage Systems (ESS)
  • Uninterruptible Power Supplies (UPS)
What's Included
  • Evaluation Board
  • Schematics
  • PCB Design File
  • Bill of Materials
  • Application Note
  • Detailed LTSpice model
  • Quick Start Video
Request Separately
  • Low Inductance Current Monitor
  • Mechanical Specifications
  • Email Request
Product Compatibility

Documents, Tools & Support

kit crd 3dd065p block diagram
Si8261

4A, 5kV, Isolated Gate Driver in a stretched SO-6 package

View Product
Si8261

4A, 5kV, Isolated Gate Driver in a stretched SO-6 package

View Product
Isolated DC-DC Converter

2W Isolated DC-DC Converter Vin=15V, Vout= +15V/-3V

Isolated DC-DC Converter

2W Isolated DC-DC Converter Vin=15V, Vout= +15V/-3V

Image that includes both the front and back of the TO-247-4 package used for Wolfspeed's discrete Silicon Carbide power devices including SiC MOSFETs and Schottky diodes.
C3M0060065K

Silicon Carbide Power 650V MOSFET C3M™ Planar MOSFET Technology N-Channel Enhancement Mode

View Product
Image that includes both the front and back of the TO-247-4 package used for Wolfspeed's discrete Silicon Carbide power devices including SiC MOSFETs and Schottky diodes.
C3M0060065K

Silicon Carbide Power 650V MOSFET C3M™ Planar MOSFET Technology N-Channel Enhancement Mode

View Product
Technical SupportPower Applications Forum

Knowledge Center

View All
Power
|
Industrial Drives

Benefits of Designing with Wolfspeed Silicon Carbide in Low Voltage Motor Drives

Wolfspeed evaluates SiC in industrial low voltage motor drives at three different power levels to evaluate efficiency improvements, and compares improvements realized when smaller heat sinks are combined with SiC.
Continue Reading  Technical Articles

Footer

Social Media

  • Facebook
  • Instagram
  • X
  • LinkedIn
  • YouTube
Copyright © 2024 Wolfspeed, Inc.