Skip to Main Content
Contact
  • English
  • 简体中文
  • 繁體中文
View Cart

Evaluation Board for 650V Silicon Carbide C3M™ MOSFET in a 7-pin D2PAK (TO-263-7L)

Product shot of Wolfspeed's KIT-CRD-8FF65P Evaluation Board
KIT-CRD-8FF65P
NOTE: Discontinued. SpeedVal Kit™ Modular Evaluation Platform is the recommended replacement.
This evaluation board demonstrates the switching and thermal performance of 650V Silicon Carbide (SiC) C3M™ MOSFET in a 7-pin D2PAK (TO-263-7L) configured in a half bridge topology. The board is designed for characterizing EON and EOFF losses and steady state thermal performance in Silicon Carbide MOSFETs. The PCB contains AlN inserts under the MOSFETs to provide electrical isolation and optimized heat transfer to the heat sink. This design :
  • Demonstrates use of an AlN inlay PCB for thermal management of surface mount power devices
  • Serves as a PCB layout example for driving D2PAK SiC MOSFETs

Specifications

  • Max DC Bus Voltage of 450V
  • Max Power of 4.2kW @ 100kHz
  • Optimized locations for scope probe measurements of drain current; VGS; and Vds
  • Predrilled thermocouple locations in the heat sink under the MOSFET
  • Synchronous and asynchronous buck and boost topologies supported
  • Kit includes two SMA and BNC adapters for measuring VGS waveforms
  • Includes heatsink; fan; fan guard; and thermal pads
  • Can be configured as full bridge DC/DC by using two evaluation boards
Applications
  • Industrial Power Supplies
  • Server/Telecom
  • EV-Charging Systems
  • Energy Storage Systems (ESS)
  • Uninterruptible Power Supplies (UPS)
What's Included
  • Fully Assembled Evaluation Board
  • Schematics
  • PCB Design File
  • Bill of Materials
  • Application Note
Request Separately
  • Low Inductance Current Monitor
  • Mechanical Specifications

Documents, Tools & Support

kit crd 8ff65p block diagram bg
ADuM4121 Gate Driver

High Voltage, Isolated Gate Driver with Internal Miller Clamp, 2 A Output with Thermal Shutdown. The integrated miller clamp activates on the falling edge of an edge transition to further clamp the output low to counteract miller turn on effects.

View on Analog Devices
ADuM4121 Gate Driver

High Voltage, Isolated Gate Driver with Internal Miller Clamp, 2 A Output with Thermal Shutdown. The integrated miller clamp activates on the falling edge of an edge transition to further clamp the output low to counteract miller turn on effects.

View on Analog Devices
C3M0060065J

650V Silicon Carbide C3M™ MOSFET in 7-pin D2PAK provides low parasitic inductances for faster switching in power conversion applications

View Product
C3M0060065J

650V Silicon Carbide C3M™ MOSFET in 7-pin D2PAK provides low parasitic inductances for faster switching in power conversion applications

View Product
Technical SupportPower Applications Forum

Knowledge Center

View All
Power
|
Industrial Drives

Benefits of Designing with Wolfspeed Silicon Carbide in Low Voltage Motor Drives

Wolfspeed evaluates SiC in industrial low voltage motor drives at three different power levels to evaluate efficiency improvements, and compares improvements realized when smaller heat sinks are combined with SiC.
Continue Reading  Technical Articles

Footer

Social Media

  • Facebook
  • Instagram
  • X
  • LinkedIn
  • YouTube
Copyright © 2024 Wolfspeed, Inc.