Contact
中文

Satcom

Knowledge Center
Home
Satcom
RF PA 101_amplifier classes image
GaN on SiC

RF Power Amplification 101: Amplifier Classes

The purpose of the RF PA is to increase the power of the RF input signal. This is achieved by applying the signal to the gate. This article compares some of the common amplifier classes, starting with the most-linear but least-efficient Class A to the still-linear (due to the ideal transistor) but more-efficient Class F and inverse-F.
Continue Reading 
 Technical Articles
waveform-basics-header
GaN on SiC

RF Power Amplification 101: Waveform Basics

RF power is delivered by the power amplifier (PA), the final stage of amplification before the antenna, with each application placing on the PA its own set of requirements in terms of frequency, bandwidth, load, power, efficiency, and linearity. This article is the first in a series that will discuss these considerations.
Continue Reading 
 Technical Articles
xband-hero-image
GaN on SiC

Integrated Expertise Delivers the Best GaN Solutions for X-Band PAs

Gallium nitride is the undisputed technology for achieving high-efficiency operation in high-frequency applications, such as those at X-band (8–12 GHz). But device selection for X-band applications doesn’t end with choosing the material technology, because turning the bulk material characteristics into high-performance GaN on SiC devices is quite another matter.
Continue Reading 
 Technical Articles
rf_virtual_tradeshow
Communication Infrastructure

Wolfspeed RF on the Web: A Virtual Trade Show Experience

We’ve missed seeing you at our industry trade shows this year. Check out our virtual booth to get an in-depth look at some of Wolfspeed’s most popular rf products
Continue Reading 
 Technical Articles
Cree Wolfspeed Logo
FacebookTwitterLinkedInYouTube
  • Contact
  • Where to Buy
  • Document Library
  • Knowledge Center
  • News
  • Events
  • Privacy Policy
  • Terms of Use
Copyright © 2021 Cree Wolfspeed